Robust and high quality industrial switches for the use in 10/100/1000 IEEE802.x Ethernet IP-networks with high data loads. All copper ports are PoE+ capable. The switches may be used in redundant ring topologies with a recovery time of less than 50ms. Two or four SFP bays allow the use of fiber optic with multimode or singlemode fiber. With the high data rate of the backplane these switches are predestinated for the use in networks with a high traffic load as for instance in video surveillance. The powerful management allows the use of these switches in big and structured networks. The switch is made for mounting on DIN-rail bars.
Video network special featuresVideo-friendly features:
Extra high backplane performance for a smooth video transmission with all ports assigned. Support of Jumbo Frames up to 9600Bytes by 100MBit/s.
Active monitoring of the camera
Switch-powered cameras by PoE are constantly monitored. In case of a camera failure the switch automatically restarts the camera. If this is not possible the switch alarms by SNMP.
Active monitoring PoE-supply
The switch alarms by SNMP in case of sudden excessive power consumption by a defect camera for example.
Active management of the PoE-performance
The PoE-ports can be started by time intervals so as to prevent an overload of the PoE power supplies.
|Special features||USB config port: For FW-update, backup, restore, boot up and syslog, USB2.0 A-Typ|
To download the firmware you need access. Please log in or register. The registration must be activated by us.
|supply voltage||48-55VDC, redundant power possible, screw clamp|
|power consumption||Max. 15W (without PoE)|
|operating temperature||-40°C to +75°C|
|dimensions||142x56x99mm (Height x Width x Lenght)|
|Testing standards||EMV: IEC61000-4-2, 4-3, 4-4, 4-5, 4-8, IEC61000-6-2, 6-4 Free fall: IEC60068-2-32 Shock: IEC60068-2-27 Vibration: IEC60068-2-6|
|copper ports||8 x 10/100/1000TX, PoE+ 802.3af/at|
|optical fibre ports||LT-PIGE-802-GBTME: 2 x 100/1000, SFP (Bei Kupfer-SFPs Typen AC-SFP-xxx verwenden)
LT-PIGE-804-BGTME: 4 x 100/1000, SFP (Bei Kupfer-SFPs Typen AC-SFP-xxx verwenden)
We recommend the use of our barox SFPs. We do not test or guarantee the compatibility of our devices with SFPs of other manufacturers.
|console port||RS232, 115,2kBit/s, 8, N, 1, RJ45|
|backplane||LT-PIGE-802-GBTME: 20 GBit/s
LT-PIGE-804-BGTME: 24 GBit/s
|configuration||Console, Webserver, Telnet, CLI, SNMP v1/v2/v3, TFTP, SSH, SSL, RMON, USB|
|port settings||Per Port: Port disable/enable, Auto negotiation 10/100/1000, Full- & halfduplex, Flow Control disable/enable, data rate|
|port status||Per Port: Data rate, Duplex, Link, Flow Control, Auto Negotiation, Trunk|
|VLAN||max. 64 VLAN ID & 802.1Q VLAN & Port Based|
|link aggregation||802.3ad LACP, static Trunk, 12 groups with 16 ports|
|QoS||Class of Service IEEE 802.1p per port 4 priorities|
|security||FCC Class A, CE, UL|
|multicast||IGMP v1, v2|
802.3, 10Base-T Ethernet
802.3u, 100BaseTX und 100BaseFX Fast Ethernet
802.3x, Flow Control und Back Pressure
802.1d, Spanning Tree
802.1w, Rapid Spanning Tree
802.1s, Multiple Spanning Tree
ITU-TG.8032 / Y.1344 Ethernet Ring Protection Switch
802.3ad, Port Trunk mit LACP
802.3af Power over Ethernet
802.3at Power over Ethernet PoE+
802.1p, Class of Service
802.1q, VLAN Tag
802.1x, User Authentication (RADIUS)
|see separate data sheet
4 x SFP
without SFPs, without power supply