The UP-COAX-TX/RX series devices transmit 10/100Mbps Ethernet and PoE/PoE+ with coaxial cable up to a distance of 300m. The devices are supplied and used in pairs, the UP-COAX-TX on the camera side and the UP-COAX-RX on the server side. The extenders make it possible to pass on the PoE supply, e.g. of a midspan, directly via coaxial cable. Power is supplied exclusively via PoE, i.e. even if the camera does not require PoE, a PoE injector, midspan or switch must be used at the beginning of the line. The devices do not require any software configuration. Diagnostic LEDs provide an overview of the operating status. The modules of the UP-COAX-TX/RX series are designed as table-top models. Several units can be joined together laterally.
|supply voltage||Power is supplied exclusively via PoE |
|operating temperature||-10 bis +55°C |
|dimensions||113 x 46 x 29mm, LxBxH |
|weight||0,1kg | interfaces
|copper ports|| |
1 x 10/100BaseT, RJ45, Poe and PoE+
The PoE power for the camera side is strongly dependent on the cable length and the cable quality.
By increasing the PoE voltage on the central side up to the maximum allowed 57VDC
the PoE power for the camera can be increased.
|extender ports||1 x Koaxialkabel, BNC Buchse |
|transmission cable||1 x coaxial cable, BNC female |
|Transmission distance|| |
The maximum transmission distance when using the above cable types is approx. 300m.
The maximum data rate is approx. 50MBit/s.maximale Datenrate beträgt ca. 50MBit/s
|PoE Management|| |
|standards||Compatible with multiple network protocols including IEEE802.3, 802.3u, 802.3x |
Supports jumbo frames
| || |
UP-COAX-TX, camera side, image BNC side
| || |
UP-COAX-RX, server side, picture RJ45 side