|Spezielle Eigenschaften||USB-config-port: For FW-Update, backup, restore, boot up and syslog, USB2.0 A-Typ|
This switch disposes of an integrated network monitoring and control system which gives the user a good overview over the whole network in an easy way. This DMS-system has the following qualities:
Graphical network map
The network map gives a quick overview over all switches and terminal devices such as IP-cameras or servers indicating the IP-address, type of device and equipment. Plans and maps can be saved as background pictures and thus enable the user to access to certain devices without knowledge of the entire IP-structure.
This function enables the access to a specific device also in large networks. Recently added devices, as per example a new IP-camera, are immediately displayed and thus enable a direct access.
Data traffic display
Graphical display of data traffic per port in a time axis.
Error handling and security
Network diagnosis between master switch and terminal devices. Protective mechanisms such as data flow restriction guarantee an effective protection against inadvertent access. IEEE802.3ah and IEEE802.1ag provide tools for structuring of networks.
To download the firmware you need access. Please log in or register. The registration must be activated by us.
48-57VDC, redundant supply is possible, screw terminal
PoE+ and PoE++ a minimum of 54VDC power supply is required
|power consumption||15W max (without PoE)|
|operating temperature||-40°C to +75°C|
|Testing standards||EMV: IEC61000-4-2, 4-3, 4-4, 4-5, 4-6, 4-8 EMI: FCC Part 15 Class A, EN61000-3-2, -3-3, -6-4, EN55022, EN55011 Free fall: IEC60068-2-32 Shock: IEC60068-2-27 Vibration: IEC60068-2-6 Railway standard: EN0121-4, EN50155 Transport: NEMA TS2 Substation: IEC61850-3, IEEE1613 Marine: DNV|
8 x 10/100/1000TX
|optical fibre ports||4 x 100/1000, SFP
We recommend the use of our barox SFPs. We do not test or guarantee the compatibility of our devices with SFPs of other manufacturers.
|console port||RS232, 115,2kBit/s, 8, N, 1, RJ45|
|configuration||Console, Webserver, Telnet, CLI, SNMP v1/v2/v3, TFTP, SSH, SSL, RMON, USB|
|port settings||As per port: Port disable/enable, auto negotiation 10/100/1000, full- & halfduplex, flow control disable/enable, data rate|
|port status||As per port: Data rate, duplex, link, flow control, auto negotiation, trunk|
|layer3 functions||IPv4 and IPv6 Unicast: static routing|
|VLAN||max. 64 VLAN ID & 802.1Q VLAN & Port Based|
|link aggregation||02.3ad LACP, static trunk, 12 groups with 16 ports|
|QoS||Class of Service IEEE 802.1p per port 8 priorities|
|security||FCC Class A, CE, SSH v1 and v2, SSL for GUI
User authentication with private key
|multicast||IGMP v1, v2, v3
MVR, Multicast VLAN registration
802.3, 10Base-T Ethernet
without power supply