- DIN rail mounting
- Copper ports: 8x10/100/1000TX, RJ45
- 8 ports with PoE, PoE+ and PoE++
- Optical fibre ports: 2 x 100/1000 MBit/s SFP
- Manageable, Layer 2/3, ring redundant, DMS
- IEEE 1588 V2, PTP
- Power supply 48-57VDC, redundant
This robust, high-quality switch is designed for use in powerful 10, 100 and 1000MBit/s Ethernet ring network structures according to IEEE802.x. The eight copper ports feature Power over Ethernet with PoE, PoE+ and PoE++. These devices have been specially developed for video networks. The switch allows the construction of one or more error tolerant rings via two or more connections. In the event of an interruption, the ring closes automatically in less than 50ms. This increases the availability of the system.
Two SFP sockets for 100/1000BaseSX/LX/ZX are available for the backbone, which can be equipped either for multimode or singlemode. The switches can also be used as stand-alone devices, for point-to-point connections or as connection modules. The extensive possibilities of the management software also allow the use of the switches in systems with high demands on the functionality of the network. Installation is very quick and easy thanks to the mounting device for mounting rails. The electrical and optical connections are ensured by standardized plugs (RJ45 or LC).
Video network special featuresActive surveillance of the camera
Cameras powered by the switch via PoE are continuously monitored. In the event of a camera failure, the switch restarts the camera automatically. If this fails, the switch sends an alarm message via SNMP.
Active monitoring of PoE power supply
If, for example, a defective camera requires too much power from the switch, the switch alerts via SNMP.
Active management of PoE performance
When the switch is started up, the individual PoE ports can be started up with a time delay to prevent the PoE power supply from being overloaded.
Additional video-friendly features
Extra high backplane performance for smooth video transmission with full port occupancy. Jumbo frames up to 9600Bytes are also supported at 100MBit/s. Port security through MAC address limitation.
|System notes||The switch supports PTP, precision time protocol according to IEEE1588 v2 and IEC 61588, a feature used in industrial automation, professional audio-video applications for audio-video bridging and telecommunications, among others.|
DMS (Device Management System)
This switch has an integrated network monitoring and control system, which gives the user a very simple overview of the entire network. This DMS system has the following features:
Graphical network overview
The view of the network topology allows a quick overview of all switches and end devices available in the network, such as IP cameras or servers, with details of the IP address, device type and name. Plans and maps can be stored as background images, allowing the user to quickly access certain network devices even without knowledge of the IP structure,
Device search functions
This function allows access to a specific device even in larger networks. Newly added devices, e.g. a replaced IP camera, are displayed immediately and allow the user immediate access without requiring the IP address.
Data traffic display
The data traffic per port can be graphically displayed over a time axis.
Error handling and security
Network diagnostics between master switch and connected terminals.
Protection mechanisms such as data rate limitation provide effective protection against unwanted access.
IEEE802.3ah and IEEE802.1ag provide tools for structuring networks.
To download the firmware you need access. Please log in or register. The registration must be activated by us.
- A&E Specs
2020-12-18, shapes ry-switches.zip 2,028 KBs
RY-Switche_Bedienungsanleitung_v1.3.pdf 6,475 KBs RY-Switch_Manual_v1.3_FR.pdf 6,368 KBs RY-Switch_Manual_v1.3_EN.pdf 6,470 KBs
48-57VDC, redundant power supply possible, screw terminals
|power consumption||Max. 15W (without PoE)|
|operating temperature||-40°C up to +75°C|
|dissipation loss||51BTU, without PoE
188BTU, with maximum PoE power output of 480W
|Testing standards||EMV: IEC61000-4-2, 4-3, 4-4, 4-5, 4-6, 4-8 EMI: FCC Part 15 Class A, EN61000-3-2, -3-3, -6-4, EN55022, EN55011 free fall: IEC60068-2-32 shock: IEC60068-2-27 vibration: IEC60068-2-6 rail norm: EN0121-4, EN50155 transport: NEMA TS2|
8 x 10/100/1000TX with PoE, PoE+ and PoE++
|optical fibre ports||2 x 100/1000, SFP
We recommend the use of our barox SFPs. We do not test or guarantee the compatibility of our devices with SFPs of other manufacturers.
|console port||RS232, 115,2kBit/s, 8, N, 1, RJ45|
|configuration||Console, Webserver, Telnet, CLI, SNMP v1/v2/v3, TFTP, SSH, SSL, RMON, USB|
|port settings||Per Port: Port disable/enable, Auto negotiation 10/100/1000, Full- & halfduplex, Flow Control disable/enable, data rate|
|port status||Per Port: Data rate, Duplex, Link, Flow Control, Auto Negotiation, Trunk|
|layer3 functions||IPv4 and IPv6 Unicast: static routing|
|VLAN||max. 64 VLAN ID & 802.1Q VLAN & Port Based|
|link aggregation||802.3ad LACP, static Trunk, 12 groups of 16 ports each|
|QoS||Class of Service IEEE 802.1p 8 priorities per port|
|security||FCC Class A, CE, SSH v1 and v2, SSL for GUI
User authentification with private key
|multicast||IGMP v1, v2, v3 MVR, Multicast VLAN Registration|
802.3, 10Base-T Ethernet
|without SFP, without power supply|