Skip to main content
New

LT-L802GBTME-BO

Industrial switch with management suitable for Bosch PAVIRO system
  • DIN rail mounting
  • Copper ports: 8 x 10/100/1000Tx, RJ45
  • Fibre optic ports: 2 x 100/1000 Mbit/s SFP
  • Layer 3 static routing
  • Managed, redundan ring is possible
  • Power voltage12-48VDC, redundant
The robust LT-L802GBTME/BO is a high quality switch for the implementation of powerful 10, 100 and 1000Mbit Ethernet ring network structures according to IEEE802.x. This device is approved for integration into the Bosch PAVIRO system. This device was specially developed for the industrial environment. The switch allows the construction of a fault-tolerant optical fibre ring via two connections. In the event of an interruption, the ring closes automatically in less than 50ms. This increases the availability of the system. Two SFP bays for 100/1000BaseSX/LX/ZX are available for the backbone, which can be optionally equipped for multimode or singlemode fibres.

The switche can also be used as stand-alone devices, for point-to-point connections or as connection modules. The extensive possibilities of the management software also allow the use of the modules in systems with high demands on the functionality of the network. Installation is very quick and easy thanks to the mounting device for mounting rails. The electrical and optical connections are ensured by standardized plugs (RJ45 or LC).

Technical data

General properties
supply voltage12-48VDC, redundant supply possible, screw terminal
power consumptionMax. 15W
MTBF
operating temperature-40°C ... +75°C
dimensions142x56x99mm (HxWxL)
Testing standardsEMV:
IEC61000-4-2, 4-3, 4-4, 4-5, 4-8
IEC61000-6-2, 6-4
Free fall: IEC60068-2-32  
Shock: IEC60068-2-27  
Vibration: IEC60068-2-6
interfaces
copper ports8 x 10/100/1000TX, RJ45
optical fibre ports2 x 100/1000, SFP
console portRS232, 115,2kBit/s, 8, N, 1, RJ45
USB configuration port: For FW Update, Backup, Recovery, Boot-Up and Syslog, USB2.0 A Type
network properties
backplane20 GBit/s
MAC-table8k
configurationWebserver, Telnet, CLI, SNMP v1/v2/v3, TFTP, SSH, SSL, RMON, USB
PoE Management
port settingsPer Port: Port disable/enable, Auto negotiation 10/100/1000, Full- & halfduplex, Flow Control disable/enable, data rate
port statusPer Port: Data rate, Duplex, Link, Flow Control, Auto Negotiation, Trunk
layer3 functionsIPv4 and IPv6 Unicast: static routing
VLANmax. 64 VLAN ID & 802.1Q VLAN & Port Based
link aggregation802.3ad LACP, static Trunk, 12 groups with 16 ports
QoSClass of Service IEEE 802.1p per port 4 priorities
securityFCC Class A, CE, UL
multicastIGMP v1, v2
standards

 802.3, 10Base-T Ethernet

 802.3u, 100BaseTX und 100BaseFX Fast Ethernet

 802.3ab, 1000Base-T

 802.3z, 1000Base-X

 802.3x, Flow Control und Back Pressure

 802.1d, Spanning Tree

 802.1w, Rapid Spanning Tree

 802.1s, Multiple Spanning Tree

 ITU-TG.8032 / Y.1344 Ethernet Ring Protection Switch

 802.3ad, Port Trunk mit LACP

 802.1p, Class of Service

 802.1q, VLAN Tag

 802.1x, User Authentication (RADIUS)

 802.1ab LLDP

Product variants

LT-802GBTME/BO

Suitable for Bosch PAVIRO system

Version 10.12.2019, Changes without notice