New

LT-L802GBTME/BO

Industrial switch with management suitable for Bosch PAVIRO and Dynacord PROMATRIX
  • Suitable for Bosch PAVIRO
  • Suitable for Dynacord PROMATRIX
  • DIN rail mounting
  • Copper ports: 8 x 10/100/1000Tx, RJ45
  • Fibre optic ports: 2 x 100/1000 Mbit/s SFP
  • Layer 3, static routing
  • Manageable, ring-capable
  • Power supply 12-48VDC, redundant
The robust LT-L802GBTME/BO is a high quality switch for the implementation of high performance 10, 100 and 1000Mbit Ethernet ring network structures according to IEEE802.x. This unit is set up for integration into the Bosch PAVIRO and Dynacord PROMATRIX systems. These devices have been specially developed for the industrial environment. The switch allows a fault-tolerant fibre optic ring to be set up via two connections. In case of an interruption, the ring closes automatically in less than 50ms. This increases the availability of the system. Two SFP bays for 100/1000BaseSX/LX/ZX are available for the backbone, which can be optionally equipped for multimode or singlemode.

The switches can also be used as stand-alone devices, for point-to-point connections or as connection modules. The extensive possibilities of the management software also allow the modules to be used in systems with high demands on the functionality of the network. Mounting is very quick and easy thanks to the holding device for mounting rails. The electrical and optical connections are ensured by standardised plugs (RJ45 or LC).

More information

Spezielle EigenschaftenThe FW version v3.0.3b is specifically defined and fixed for the Bosch PAVIRO and Dynacord PROMATRIX evacuation systems.
This makes the LT-L802GBTME/BO unsuitable for use in other network applications.

Technical data

General properties
supply voltage12-48VDC, redundante Speisung möglich, Schraubklemme
power consumptionMax. 15W
operating temperature-40°C bis +75°C
dimensions142x56x99mm (HxBxL)
Testing standardsEMV:
IEC61000-4-2, 4-3, 4-4, 4-5, 4-8,
IEC61000-6-2, 6-4
Freier Fall: IEC60068-2-32  
Schock: IEC60068-2-27  
Vibration: IEC60068-2-6
interfaces
copper ports8 x 10/100/1000TX, RJ45
optical fibre ports2 x 100/1000, SFP (For copper SFPs use types AC-SFP-xxx)
console portRS232, 115,2kBit/s, 8, N, 1, RJ45
USB-Konfig-Port: Für FW-Update, backup, restore, boot up und syslog, USB2.0 A-Typ
network properties
backplane20 GBit/s
MAC-table8k
configurationWebserver, Telnet, CLI, SNMP v1/v2/v3, TFTP, SSH, SSL, RMON, USB
PoE Management
port settingsPer Port: Port disable/enable, Auto negotiation 10/100/1000, Full- & halfduplex, Flow Control disable/enable, data rate
port statusPer Port: Data rate, Duplex, Link, Flow Control, Auto Negotiation, Trunk
layer3 functionsIPv4 und IPv6 Unicast: static routing
VLANmax. 64 VLAN ID & 802.1Q VLAN & Port Based
link aggregation802.3ad LACP, static Trunk, 12 groups of 16 ports
QoSClass of Service IEEE 802.1p per port 4 priorities
securityFCC Class A, CE, UL
multicastIGMP v1, v2
standards

 802.3, 10Base-T Ethernet

 802.3u, 100BaseTX und 100BaseFX Fast Ethernet

 802.3ab, 1000Base-T

 802.3z, 1000Base-X

 802.3x, Flow Control und Back Pressure

 802.1d, Spanning Tree

 802.1w, Rapid Spanning Tree

 802.1s, Multiple Spanning Tree

 ITU-TG.8032 / Y.1344 Ethernet Ring Protection Switch

 802.3ad, Port Trunk mit LACP

 802.1p, Class of Service

 802.1q, VLAN Tag

 802.1x, User Authentication (RADIUS)

 802.1ab LLDP

Product variants

LT-L802GBTME/BO

Suitable for Bosch PAVIRO and Dynacord PROMATRIX system

Version 28.04.2021, Changes without notice