Skip to main content

RY-GSP17-10 en

19" switch with WebSmart management and 8 ports with PoE +
  • 19" switch with PoE
  • Copper ports: 8 x 10/100/1000 with PoE+
  • Max. 130W for all ports
  • Fibre optic ports: 2 x SFP 100/1000
  • Websmart Management, ring-capable
  • Fanless
  • Power supply 230VAC
This video-optimised switch was specially developed for applications with high data loads, such as video over IP, video streaming also in connection with multicast. The PoE allows IP cameras to be fed via the data cable. The compact design and the reduced number of ports make this switch ideal for smaller systems or as a remote unit in a larger network. With the extensive management options, even complex network requirements can be met.

Video network special features

Video-friendly features
Extra high backplane performance for a smooth video transmission with all ports assigned. Support of Jumbo Frames up to 9600Bytes by 100MBit/s.  MAC-address restriction ensures port security.  

Active monitoring of the camera
Switch-powered cameras by PoE are constantly monitored. In case of a camera failure the switch automatically restarts the camera. If this is not possible the switch alarms by SNMP.  

Active monitoring PoE-supply
The switch alarms by SNMP in case of sudden excessive power consumption by a defect camera for example.

Active management of the PoE-performance 
The PoE-ports can be started by time intervals so as to prevent an overload of the PoE power supplies.


DMS (Device Management System)

This switch disposes of an integrated network monitoring and control system which gives the user a good overview over the whole network in an easy way. This DMS-system has the following qualities:

Graphical network map 
The network map gives a quick overview over all switches and terminal devices such as IP-cameras or servers indicating the IP-address, type of device and equipment. Plans and maps can be saved as background pictures and thus enable the user to access to certain devices without knowledge of the entire IP-structure. 

Device search
This function enables the access to a specific device also in large networks. Recently added devices, as per example a new IP-camera, are immediately displayed and thus enable a direct access. 

Data traffic display
Graphical display of data traffic per port in a time axis. 

Error handling and security
Network diagnosis between master switch and terminal devices. Protective mechanisms such as data flow restriction guarantee an effective protection against inadvertent access. IEEE802.3ah and IEEE802.1ag provide tools for structuring of networks. 


To download the firmware you need access. Please log in or register. The registration must be activated by us.


Technical data

General properties
supply voltage100-240VAC, 50-60Hz
power consumptionMax. 10W (ohne PoE) / 150W (mit PoE)
MTBF25°C: 589'202h
50°C: 248'902h
operating temperature0°C bis 50°C
dimensions220 x 242 x 44mm (BxTxH)
weightNettogewicht: 2,9kg
copper ports

8 x 10/100/1000TX, with PoE+, RJ45
Maximum PoE power for all PoE ports: 130W

optical fibre ports2 x 100/1000, SFP
We recommend the use of our barox SFPs. We do not test or guarantee the compatibility of our devices with SFPs of other manufacturers.
network properties
managementHTTP/HTTPS, SSH v1 & v2, Telnet Client, IPv6 Management
SNMP v1, v2c, v3 supports traps and USM
DHCP Client
DHCP Server
Embedded RMON agent supports RMON groups 1,2,3,9 (history, statistics, alarms and events) for improved traffic management, monitoring and analysis
configurationWeb GUI, SNMPv1, v2c, 3, no console port
PoE ManagementPort Configuration, port-by-port setting of PoE values.
PoE Scheduling, supports PoE scheduling per port to switch PoE devices (PDs) on and off.
Auto-checking, checks the connection status of the PDs. PD is restarted if it does not report.
Power Delay, the individual ports can be started up with a time delay to prevent overload.
port settingsPort disable/enable. Auto-negotiation 10/100/1000Mbps. Flow Control disable/enable. Data rate control on each port. Max. Framesize, Power Control
port statusDisplay per port speed link status, flow control status. Auto negotiation status, trunk status.
layer3 functionsNo layer 3 functions
VLANPort based VLAN
Tagged based VLAN, IEEE802.1Q
Protocol based VLAN
IP subnet-based VLAN
Private VLAN Edge (PVE)
MAC-based VLAN
Q-in-Q (double tag) VLAN
Voice VLAN
link aggregationIEEE 802.3ad LACP
Static Trunk

Up to 8 Hardware Queues
Classification: Port based, 802.1p VLAN priority based, precedence / DSCP based, DiffSer, Classification and re-marking
Rate Limiting: Ingress Policer, Egress shaping and rate control, Per Port


802.1X RADIUS/TACACS, authentication, authorization and accounting, MD5
ACL mit MAC, IP, Multicast, Storm control u.v.a.
PVE provides L2 isolation between clients in the same VLAN. Supports multiple uplinks
IP Source Guard
DHCP Sourceguard
Loop protection

multicastIGMP v1/v2/v3 snooping, bis 512 Multicast Gruppen, Source-Specific Multicast, IGMP Proxy
topologySTP, Standard Spanning Tree, IEEE802.1d
RSTP, Rapid Spanning Tree, IEEE802.1w
MSTP, Multiple Spanning Tree, IEEE802.1s

 IEEE 802.3 10Base-T

 IEEE 802.3u 100Base-TX/100BASE-FX

 IEEE 802.3z Gigabit SX/LX

 IEEE 802.3ab Gigabit 1000T

 IEEE 802.3x Flow Control and Back pressure

 IEEE 802.3ad Port trunk with LACP

 IEEE 802.1d Spanning tree protocol

 IEEE 802.1w Rapid spanning tree protocol

 IEEE 802.1s Multiple spanning tree protocol

 IEEE 802.1p Class ofservice

 IEEE 802.1Q VLAN Tagging

 IEEE 802.1x Port Authentication Network Control

 IEEE 802.1ab LLDP

 IEEE 802.3af/at Power over Ethernet

 IEEE Energy Efficient Ethernet

Product variants


incl. 19" mounting bracket, see below

RY-19" mounting

Included in delivery

Version 20.12.2022, Changes without notice